Skip to main content

Welding fume is a known carcinogen that can lead to lung cancer, according to the International Association for Research on Cancer (IARC).

Ventilation Solutions needed for Laser Welding

Altough MUCH LESS fume, you still need fume extraction!

Laser welding is a rapidly growing process in manufacturing and is popular due to its high level of precision and efficiency. While the initial investment for laser welding systems is higher than most other systems, the benefits are profound in terms of ability and speed.

However, laser welding operations incur serious challenges when it comes to weld fumes. Because laser welders operate at such high temperatures, their weld fumes, altough much less than in normal welding, are full of very small particulates.The smaller the particulate, the more inhalable and dangerous it is for workers.

While a laser welder functions in an enclosed cell—one without a human operator—it is still very important to capture the fumes inside the cell. Besides toxicity and other reasons to collect weld fumes, such as safety regulations, laser welders need a fume free environment so the laser can perform at its optimal level. If fume builds up near the laser, the particles within the fume can refract the laser beam, making the process both less efficient and less precise.

Given the possible automation of laser welding units, the systems can achieve much higher productivity than a strictly manual workforce while consuming less resources. The downside of this increased efficiency is additional weld fume and the need for capture equipment to effectively remove the smoke from the area. Lasers, after all, require a very clean operating environment since smoke causes laser refraction and refraction is the enemy of good welds.

Laser welding fume extraction requires a slightly different approach than typical manual welding ventilation systems. As stated above, thelasers require an extremely clean air environment to protect against laser refraction which can result in an indirect focus of the light beam on the weld seam, diminishing quality. The laser welding ventilation system should provide a 10 to 15 second turnover rate for air at the point of welding to ensure a clean enough environment.

In addition to a clean air environment, laser welders require light-tight enclosures to prevent lasers from escaping the weld area and causing harmful effects to the plant and workers. Since the enclosure is essentially sealed, source capture welding ventilation systems should be integrated to each laser welding enclosure to prevent weld fume accumulation.

Finally, it's important to remember the characteristics of weld fume particulate created in laser operations. Compared to other types of welding, the resulting particles are much finer. Therefore, the laser welding ventilation system should incorporate filters designed specifically for capturing these ultra-fine particles and removing them from the air before it's returned to the plant environment.

Danger of Welding emissions

Depending on the materials being welded, laser welding may generate fumes that are hazardous to health.
Altough laser welding generates much less fume than any other welding process

Therefore, it is important to always provide sufficient extraction and fresh air.