Skip to main content

WOBBLE6-PRO+: the very best handheld Laser welding machine on the market!

Affordable European Design, full CE and Available from October 2021

Wobble6-PRO+ : "the" reference of handheld laser welding machines in the market

Control your laser welding with one finger from where you stand

Most flexyble handheld laser torch on the market!

Unique welding parameter control system on the torch!

Maximum applicable power

2000W

Focus lens specifications

D=20mm, F=150mm

Collimating lens specifications

D=20mm, F=50mm

Protective lens specifications

D=20mm, T=3mm

Welding Torch weight with digital control

918 grams

Wobble diameter adjustment0 - 4 mm

Maximum gas pressure for cutting

15kg

PWM adjustable range

0-10KHz

Swing frequency (four times higher than model 3 and 4+)

0-400Hz

Double protection lenses against dust and fume

Highest lifetime of the torch on the market with full twin dust protection.

Dual axis Handheld intelligent Laser Welding Machine

ONE MACHINE with FOUR functions - Available 2021/09

Welding without wire infeed 

Welding with wire infeed

Laser Cutting metal

Laser cleaning welded seams

PLUS  

6 Wobbling modes digital programmable

simple operations adjusting from welding torch

Wobble width can adjusted 0 - 4mm

double Protection lenses

 

Your VERY best choice for metal working

Dust-Proof Design : Patented Double Protection agains dust and spatter

Twin Laser head protective lenses: Never to change your expensive lenses again!

As the name suggests, protective lenses are protecting the laser welding head. To prevent dust and slag make damage to the internal lens of the laser head, one extra protection lens has been mounted. Pay attention to the fact that the laser head protection lens is a wearing part.

Double protection lens design, better dust resistance:  By adding a second protecction glass, dust, fume, spatter and dirt never get a chance anymore to contaminate your main lenses and reduce the efficiency of welding. While exchanging the first protection glass, your valuable lenses stay fully protected with a second protection glass. This feature keeps your lenses always clean and results in almost never needed to change your lenses! this creates an anual saving!

Highly dustproof: IP65 class dust proof, patent double protection lens, dust proof without dead Angle

Fast adjustable and changeable Nozzle

Weld always with the perfect nozzle and the exact focus length

  • Adjust the focus length of your welding nozzle in seconds 
  • Change your nozzle, and only the top of the nozzle in a flash
  • Custom made nozzles are easy to make
  • differnt nozzle-ends available for specific use

Lightweigth: only 913 grams

Very ergonomic and light welding torch with a weight of only 913 grams.  the perfect solution for high precision works and the best and most comfortable torch for long lasting jobs!

Digital control of the welding parameters with one finger on the welding torch

Save time by fast welding parameter setting on the spot!

Change all your welding settings from your workspot.  No need to run to your controller, its all on your fingertips. in the welding torch. 

On-torch controll and display of following welding parameters with one finger:

  • Welding power
  • Welding width
  • Welding mode: Continue welding or pulsed welding
  • Welding form: Circle, line, triangle,..
  • Ramping up and ramping down
  • Wire feed forwaard and backwards

 

Easy and practical Hidden fiber cable support

Cable Support Arm: Open/close in seconds - drops fully in the top cabinet

Wobble-6PRO+: Super Intelligent handheld Laser Welding System

Unique twin drive Wobble laser Welding Gun Design with distance control

The Intelligent Laser Welding  System is specially developed for complex and High-Tech handheld laser welding applications. Really simple and easy to operate, no technical knowledge required. It is a multi-functional application system, which is able to control the laser power, frequency, ramping, pre- and aftergassing, puls or continue mode and it has a variety of welding functions (dot, Line, circle, zigzag, ...), suitable for spot welding scenes and seam welding. The beam can be adjusted with a width of 0,2-4mm, suitable for welding with complex, High-Tech and irregular workpiece. Simple workpieces are also done much faster and better!

Twin Wobble laser Welding Torch Technology - 2-D dynamic beam motion

Concept of the 2-D dynamic laser beam motion or double wobble head technology.

The six basic programmable shapes available from an industry-standard wobble welding head are shown. Independent control of the amplitude and frequency of the oscillation is achieved through a high speed dual servo controller, allowing more flexibility in stabilizing the keyhole melt during the welding process. 

Stability of the keyhole in the meltpool is a critical factor when laser welding dificult highly reflective materials such as copper and aluminum. This is partly due to the tendency to spatter, and in the case of some aluminum alloys, a high level of porosity due to the viscosity and surface tension of the melt when using more traditional laser welding techniques. Recent studies have shown the reduction or elimination of these problems with the beam wobble technique, including a recent systematic study from lasser welding with and without filler wire on automotive aluminum alloys.

Overall, the wobble head technique allows for better temperature management of the part. Because the beam passes near any given point of the weld multiple times, the ramp in temperature and cooling rates is slower than in traditional laser welding, which helps eliminate defects and manage spatter.

In addition, this welding technique is compatible with typical welding accessories such as assist gas ports and coaxial nozzles that enable plume suppression and can help control spatter; techniques that are not readily compatible with the scan heads used in remote welding.

In addtion to stabilizing the keyhole in the meltpool and reducing porosity in the subsequent weld, the beam wobble technique has proven valuable for alleviating the part-fit requirements for laser welding. Using one of the programable wobble shapes and optimizing the amplitide and frequency of the oscillation, an increase in the acceptable seam gap of three till 5 times compared to the seam gap size achieved in conventional laser welding has been demonstrated.

 

Select Your optimal Wobbling Mode with only one fingertip

Dual-axis handheld laser welding machine

Compared with traditional handheld laser welding machine, the welding advantages are obvious. The laser swing amplitude (range: 0mm-4mm) and swing pattern can be set through the control system during the welding process. The width of the weld seam can be customized through the swing amplitude, which solves the defect of traditional hand-held laser welding that requires very high speed weld seams. Greatly improves the welding fault tolerance rate. Moreover, safety protection measures have been added, which only emit laser light when the nozzle is in contact with metal! The operation is simple and easy to use, the structure is simple and easy to maintain, the volume and weight is greatly reduced, and the wire can be fed during the welding process.

Wobble-6PRO-Plus

After continuous testing and improvement, we finaly launced the latest and our VERY BEST dual-drive swing/wobble welding machine.

We use a high performant dual-axis swing welding head for our Wobble-6PRO+  

  • With 6 kinds of spot modes (O, |, 8, ∞, --, /\)
  • the spot size can be adjusted from 0-4mm,
  • simple operation, 
  • digital choice and adjustment with a fingertip on the torch
  • can significantly improve welding efficiency. 
  • is standard equipped with an automatic wire feeding device,
  • Wobbling at 400Hz or 24000rpm max, which improves drastically the thin plate welding
  • Special start function for Aluminium (patent pending)

 

Laser welding and laser cutting with one tool

Today's fiber laser sources have the power and beam quality needed to cut and join metal in an expeditious and repetitious manner. The market demands that type of flexible production, so those characteristics are basic requirements in modern laser devices.

Market demands also have promoted the idea of multifunctional processing. That has led to the development of a combination head capable of laser cutting and welding 3-D metal workpieces.

The "wobble-6PRO-Plus," can perform 3-D cutting and welding in an arbitrary sequence without retooling. Part handling, positioning, and clamping steps are eliminated with this approach. The result is reduced production time and costs, as well as improved manufacturing accuracy.

Moreover, the combi-head opens up the door to fabricating complex metal components with a range of variants, which could not be produced cost-efficiently before.

While the concept of multifunctional laser processing is straightforward and the market seems to be ready for such a device, some technical problems had to be solved before it became reality.

Most compact Full CW power Laser Welding Machine on the market

Big welding power with full Water cooling in a small box!!

10 Meter fiber welding cable and welding torch are nicely hidden in the top cover cabinet. Take out only what is needed from the triple layer protected Fiber cable to weld comfortably and let the rest of the fiber cable good protected in the top cabinet.  When no need to weld, then your precious welding Torch and fiber cable is nicely behind the metal cover locked away. Easy for transport and nobody can touch, damage or steal anything!

 

Left side : 1000 and 1500 Watt Welding power                                                                                                                            right side : 2000Watt welding Power