Skip to main content

PhotonWeld-A1600 ® - Simply the Best laser Welder

PhontonWeld ® A-Serie is an ecological responsable portable fiber laser handheld welder based on the revolutionary EcolEner 976nm pump technology,

The currently offered laser welding equipment in the market today is mainly a water-cooled solutions. Their heat is taken out of the laser through the external coolant circulation of the chiller with big ventilation system.  PhotonWeld ® Series focuses on generating less heat in the first step and then reduce the lost energy for cooling.  Our super high photoelectric conversion efficiency of 976nm EcolEner-technology Creatively solved this problem. Generating minimal 20% less heat than any other laser source in combination with high efficient inverter driven optimalized air cooling system, creates a real sustainable welding machine with high ecological and economical advances compared to any other laser welding machine on the market.

We launched the the air-cooled 976nm technology for the first time in the industry, which generatges the drastic reduction of the  power consumption and creates perfect portability, and with this winning combination we take the lead in the technical development direction of fiber laser handheld welding Machines.

1600 Watt Continue Laser Welding Power

Only 220V -16A mono phase electric connection needed!!

Photonweld webpage under construction - Soon ready

Our team is upgrading all info on the new Photonweld Laserwelding machine

Real Portable dimensions and Weight

First 2.5kW laser Welding Machine fitting in any trunk of a car!!


PhotonWeld-A1600

Product characteristics

  • MAX continue output power 1585W,  Max Pulse Peak Power = 2500 W
  • Welding depth in Continue mode reach to 6 mm
  • 976nm pump technology ,high efficiency WPE ≥42%
  • Simple pendulum welding head,adjustable welding width 0-5mm
  • Laser frequency = 1070 +-10nm
  • Weight <62kg, compact design ,small size 
  • Air cooling technology, ultra energy-saving invertor drive
  • Upply voltage 220VAC-50/60Hz - connection needed: 220V-18A
  • Triple safety protection
  • build-in gaz/air pressure monitoring
  • Works with most protection-gasses : Argon, Nitrogen, Ar+/CO2mix, comprressed air,..
  • Dimensions : 650 x 300 x 621 mm
  • With EcolEner Energy saving technologie

Material Welding Range PhotonWeld-A1600

Material Thickness single side Thickness both sides
Stainless steel ≤6mm ≤12mm
Mild steel ≤5mm ≤10mm
Aluminum ≤4mm ≤8mm
Brass ≤1mm ≤2mm
Copper ≤1mm ≤2mm
     
These values are indicational and depend of the material welded    

Controller with smart Welding Technology database integrated!

Never forget a special welding parameter setting anymore

  • Welding Technology Database available with recommended settings for most of the materials
  • 58 preprogrammed weld settings for all materials and thicknesses
  • 18 weld settings free to program to make your own "specials"
  • Keep special jobs with special settings in the memory ! 
  • let the controller advise you and you can do the fine tuning to make the welding even better adapted to your specific job
  • Super fast changeover to another welding job
  • Save or select your different materials optimal settings with one fingertip.

For a Greener Tomorrow

PUT all the pieces together and invest in a photonweld laser Welding Machine

Owing to the high conversion efficiency of the Fiber laser, you can slash your electricity bill. The energy efficiency achieves values of between 40 and 50% – exceptional for laser technology.

PhotonWeld-Wobble5+ Features

Higher Efficiency

Independent intellectual property rights 976nm high-efficiency energy-saving technology,high-brightness single-module laser technology

New air-cooled technology platform architecture,active refrigerant type heat dissipation

Optical Light conversion rate is 2 to 3 times higher than the standard laser sources

 

More Portable

The weight and volume are better than water cooled hand-held laser welding machine, and the volume is about 1/4, the weight is about 1/3 of it

Extremely lightweight body, so that the application scene has nearly doubled, take it with you, plug and play (220V)

The integrated body design conforms to ergonomics and improves the mobile reliability of the whole machine

Easy to load ,more portable

 

Easy to Operate

Compared with operating traditional welding machines, novice welders do not need a lot of time training and experience accumulation, and only need a few hours of learning to get started easily

The machine presets 55 sets of commonly used welding parameters, which can be quickly switched to the best welding parameters according to different materials and thickness.

Set parameters through the panel, the operation is very intuitive and concise, and can be customized and saved at the same time

Built-in 55 programs+ customizable

 

Better performance

In different materials and thickness, better welding effect, without distortion, undercut or burn-through.

The process is smooth and beautiful, deep penetration, small deformation, no need for subsequent processing

 

Improve Efficiency

Compared with the traditional welding method, it has unparalleled speed advantage, and the efficiency can reach nearly 10 times in some scenarios.

The welding seam is beautiful and has no deformation, which improves the one-time pass rate of the workpiece, only a small amount of solder splashes, reduces the subsequent grinding and polishing process, improves the pass rate, improves efficiency, reduces waste, and reduces the cost of workpieces

 

More Safety

Our Laser welder is IV class laser products. In order to operate safely ,require protective measures .

Key switch and an emergency stop button to ensure the safety of operation with color LED lights

QBH interlock ensure the laser transmission integrity

Work-piece and welding head interlock,The laser will automatically off when welding heading leaves the work-piece

Control panel and Interface

All interfaces are uniformly arranged on the back of the machine, clearly marked tofacilitate quick start

Fiber delivery cable,gas pipes and control cables are pre assembled into the protective cable (5m/10m)

Plug in AC power supply, insert the protective gas , set the parameters, and fix the work-piece to be processed,and the welder will be ready to operated.

Access advance parameter setting page through Ethernet /WIFI, fine adjust and save the parameters

Simple menu for welding modus selection

Every welding pulse 100% equal.

Special Programmable pulse welding  function for pre-assembly

To be able to assemble all you parts invisible we introduced the programmable pulse. Every assembling weld will be equal and invisible. Pulse programmable per milisecond : 1 till 1000 msec. With ramping up and ramping down!

Unique for assemblies, point welds, pressure welds, invisible welds, ...

Most compact Full CW power Laser Welding Machine on the market

Big welding power in a small box!!

1100 and 1600 Watt Laser Welding power